1960-69 HEI electronic distributor, Ready to Run, for 80 to 110HP engines, red pin type cap: This is the best upgrade for your Corvair ignition: this brand new unit (not rebuilt) is ready to install, includes red cap, rotor, hardware and instructions; using the latest circuit board technology, it eliminates the need for external ignition control; comes with 4 extra springs and 3 extra bushings, allowing you to fully adjust the mechanical advance by achieving a variety of timing curves, a vacuum advance block-off plate, and a tachometer input extension cable. Can work with a digital 6AL power box. With this distributor, you will need to run pin type spark plug wires, the unit requires 12 volts at coil terminal, and you must use a high output 12 volt coil (will not work with stock coil), all available on this page. Since this unit requires 12 volts, you will need to do some modifications to get a full 12 volts to the unit, you must bypass the ballast resistor wire. I have installed this unit in several of my rides, as well as in customers, I really like the performance! So, keep up with the times, ditch points, condenser and Pertronix, get 100% reliability in starting, no more hesitation or missing! Upgrade your Vair with this brand new electronic distributor! Feel free to call or text us at 918-413-1548 with any questions you might have. Note: this unit will not work with Turbos, nor clear the smog pump, nor the A/C unit. It will clear shrouds.
This product was added to our catalog on Friday 26 July, 2019.