Gaskets & Seals


At Corvair1, we only sell one type of gaskets: the best ones. No second choices that are not up to standards. All our gaskets are top of the line, made in the USA to Corvair specifications. These are the gaskets I have been using in my own rides, as well as customers',for many years.   Most of them are thicker than the average ones out there, for better seal and performance. Note that often good gaskets can leak due to use of improper sealer. Many people use silicone, and too much of it, thinking that will stop any leak. That can actually make it worse. There are many types of sealers out there, some claim to be specially designed for gaskets, some will be real hard to remove when time comes to replace gaskets; my personal preference for sealer is lithium white grease, I would say it works awesome! and a little dab does the job. Our seals are some of the best ones, we offer choices of material when available: original polyacrylate and viton, the preferred choice for many....don't hesitate to call Rafee at 918-413-1548 with any questions you might have.
 

Avoid this silicone mess!!! LOL!


1960-69 top blower fan housing gaskets in bulk,12, #RGSB17

1960-69 top blower fan housing gaskets in bulk,12, #RGSB17

1960-69 Rafman top blower fan housing gaskets in bulk, count 12, heavy duty, made in the USA: you will need 2 gaskets to replace the blower fan...
1960-69 top blower fan housing gaskets, pair, w. freebie,#RGS172

1960-69 top blower fan housing gaskets, pair, w. freebie,#RGS172

1960-69 HD pair of Top Blower Fan Housing Gasket, oil resistant, with a free breather tube o ring viton to complete the job: get more for your money...
1960-69 upper breather tube o ring,viton, #RGS02

1960-69 upper breather tube o ring,viton, #RGS02

1960-69 upper breather tube/ air cleaner to breather tube o ring, viton : this is the ring that goes between the breather tube and the tube that...
1960-69 Viton bell housing seal,#RGS51

1960-69 Viton bell housing seal,#RGS51

1960-69 Viton bell housing seal/ crankshaft seal: this heavy duty seal will tolerate more heat than the regular one, and last longer, I highly...
1960-69 viton push rod tube o rings in bulk 120,#RGSB28

1960-69 viton push rod tube o rings in bulk 120,#RGSB28

1960-69 Rafman Viton push rod tube o rings in bulk, count 120, or 5 sets of 24 : only for the push rod tubes; will fit all years and models;...
1960-69 Viton rear housing seal,#RGS52

1960-69 Viton rear housing seal,#RGS52

1960-69 viton rear housing seal/ crank pulley rear housing seal, all: will fit all years, cars, trucks and vans; heavy duty seal. Don't hesitate...
1960-69 viton rocker studs o rings in bulk 60,#RGSB29

1960-69 viton rocker studs o rings in bulk 60,#RGSB29

1960-69 Rafman Viton rocker studs o rings in bulk, count 60, or 5 sets of 12 : only for the rocker studs; will fit all years and models; don't...
1961-62 Mirror Hardware,#RMC11

1961-62 Mirror Hardware,#RMC11

1961-62 Mirror Hardware, includes a gasket, and screws. Exact reproduction.there it is, replace your worn-out gasket and stop scratching your paint !
1961-63 diff to trans. gasket & seal kit, 4-speed, #RDP78

1961-63 diff to trans. gasket & seal kit, 4-speed, #RDP78

1961-63 4-speed transmission gasket and seal kit, heavy duty: this high quality kit includes all the gaskets and seals that you need to re-seal...
1961-65 front hub inner bearing seal, F/C , #RGS167

1961-65 front hub inner bearing seal, F/C , #RGS167

1961-65 F/C heavy duty front wheel hub inner bearing seal, trucks and vans: you will need 1 per side; don't hesitate to call us at 918-413-1548...